Order Products : sales@su-jiao.com
Alpha PVC GW 2403-1-VW1 NAT 75 LCF
| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | AlphaGary |
| Trademark: | Alpha PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LU6IZt_Alpha-PVC-GW-2403-1-VW1-NAT-75-LCF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A 75°C DEGREE, FLAME RESISTANT, HIGH QUALITY, LEAD FREE JACKETING COMPOUND. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.36 to 1.40 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A | 92 to 98 | ||
| Shore A, 15 sec | 84 to 90 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D412 | ||
| 0.762 mm | 19.3 | MPa | |
| 1.91 mm | 17.2 | MPa | |
| Tensile Elongation | ASTM D412 | ||
| Break, 1.91 mm | 320 | % | |
| Break, 0.762 mm | 300 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -20.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Constant (23°C, 100 MHz) | 3.15 | ASTM D150 | |
| Dissipation Factor (23°C, 100 MHz) | 0.022 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.762 mm) | V-0 | UL 94 | |
| Oxygen Index (3.18 mm) | 28 | % | ASTM D2863 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sumikon® VM 1712L17D | Mitsubishi Chemical Corporation | PVC, Rigid | Sumikon® VM |
| VICOTE® F804Blk | Victrex plc | PEEK | VICOTE® |
| Next Nylon 6 Prime Series NXF-01WH | Next Polymers Ltd. | Nylon 6 | Next Nylon 6 Prime Series |
| FHR EPS 54-S7454 | Flint Hills Resources, LP | PS (EPS) | FHR EPS |
| ALTECH® PA6 A 2030/320.01 GF30 UV | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
