Order Products : sales@su-jiao.com

AMPLIFY™ AA 698

Category:	EAA , Functional Polymer
Manufacturer:	The Dow Chemical Company
Trademark:	AMPLIFY™ AA
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	BYmf6U_AMPLIFYAA698.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

AMPLIFY™ AA 698 is a medium acid copolymer offering enhanced adhesion vs. LDPE, and thus potential for reduced processing temperatures or processing without substrate or melt pre-treatments.

Main Characteristics:

Good adhesion to metallic, paper and PE Substrates

Good heat sealability and hot-tack

Excellent draw-down

Low neck-in

Complies with the requirements for use in contact with food of the EU-Directive 2002/72/EC. Contact a Dow Sales office to obtain a detailed food contact compliance letter for this product.

Complies with U.S. FDA 21 CFR 177.1310(b). Consult the regulations for complete details.

General Information
Agency Ratings	FDA 21 CFR 177.1310 (b) European 2002/72/EC
Forms	Particle

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.927	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) ¹(190°C/2.16 kg)	7.5	g/10 min	ASTM D1238
Comonomer Content ²	3.0	%	Internal method

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D638
Yield, molding	13.5	MPa	ASTM D638
Fracture, molding	8.10	MPa	ASTM D638
Tensile Elongation (Break, Compression Molded)	490	%	ASTM D638

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	96.0	°C	ASTM D1525
Melting Temperature (DSC)	105	°C	Internal method

Extrusion	Nominal Value	Unit	Test Method
Melt Temperature	260 - 310	°C
Shrinkage- 25 g/m² at 100 m/min (290°C)	155.0	mm	Internal method
Drop-down- Acceleration from 15 g/m² at 100 m/min	150	m/min	Internal method

Note Message
1 .	As measured during production.
2 .	Comonomer content measured by direct titration procedure.

Resin Grade	Manufacturer	Category	Trademark
Topolymer® 5321-951E	Dongguan Top Polymer Enterprise	TPE	Topolymer®
HiFill® HDPE LGF50 12mm	Techmer Engineered Solutions	HDPE	HiFill®
ICORENE® 1869	ICO Polymers EMEA, A Division of A. Schulman	LLDPE	ICORENE®
LUBEMID A26 GF50 NATURAL	LUBEN PLAST srl	Nylon 66	LUBEMID
OPTUM® DPP40WI05WH	Ferro Corporation	Polyolefin, Unspecified	OPTUM®