Order Products : sales@su-jiao.com
Braskem PE IB-58
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LRPGYN_Braskem-PE-IB-58.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
IB58 is a High Density Polyethylene, narrow molecular weight butene-1 copolymer, produced by solution process, for injection molding applications. It offers very good processability combined with good stiffness, impact strength and stress crack resistance. It contains antioxidant additive. Application: Thin-wall articles, housewares, toys, food containers and general purpose containers for indoor applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.958 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 35 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | ASTM D1693 | ||
| 50°C, 2.00 mm, 10% Igepal, Compression Molded, F50 | < 1.00 | hr | |
| 50°C, 2.00 mm, 100% Igepal, Compression Molded, F50 | < 2.00 | hr |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 59 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Compression Molded | 28.0 | MPa | |
| Break, Compression Molded | 26.0 | MPa | |
| Flexural Modulus - 1% Secant (Compression Molded) | 1230 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Compression Molded) | 30 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Compression Molded) | 77.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 125 | °C | ASTM D1525 1 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 160 to 230 | °C |
| Note Message | |
|---|---|
| 1 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ALTECH® PA6 B 1000/509 | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
| DILAMID® 6 FV 15 NATURAL | Dilaplast S.p.A. | Nylon 6 | DILAMID® |
| Grilon® BS V0 | EMS-GRIVORY | Nylon 6 | Grilon® |
| Sarlink® TPV X6185N | Teknor Apex Company | TPV | Sarlink® TPV |
| LNP™ THERMOCOMP™ PF008 compound | SABIC Innovative Plastics | Nylon 6 | LNP™ THERMOCOMP™ |
