Order Products : sales@su-jiao.com
Adell PS IV-14-N
| Category: | PS (HIPS) , High Impact Polystyrene |
| Manufacturer: | Adell Plastics, Inc. |
| Trademark: | Adell PS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | G0qXV9_Adell-PS-IV-14-N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Adell PS IV-14-N is a High Impact Polystyrene material. It is available in North America. Primary attribute of Adell PS IV-14-N: Lubricated. |
| General Information | |
|---|---|
| Additive |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 21.4 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 70 | % | ASTM D638 |
| Flexural Modulus | 1760 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 120 | J/m | ASTM D256 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Wellamid® MR410 22H-GY1 | Wellman Engineering Resins | Nylon 66 | Wellamid® |
| CP PRYME® Polystyrene PS100-8M NAT | Chase Plastics Services Inc. | PS (GPPS) | CP PRYME® Polystyrene |
| EPO-TEK® H70E-1 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| HANWHA EVA 2240 | Hanwha Chemical | EVA | HANWHA EVA |
| Plaskon 7060 | Cookson Electronics - Semiconductor Products | Epoxy | Plaskon |
