Order Products : sales@su-jiao.com
TRILAC® ABS-HH2500
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Polymer Technology and Services, LLC |
| Trademark: | TRILAC® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | KCZKgE_TRILAC-ABS-HH2500.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TRILAC® ABS-HH2500 is an Acrylonitrile Butadiene Styrene (ABS) product. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Primary characteristic: heat resistant. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 220°C/10.0 kg | 1.8 | g/10 min | |
| 230°C/3.8 kg | 0.20 | g/10 min |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 110 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 44.0 | MPa | ASTM D638 |
| Flexural Modulus | 2070 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 63.4 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| 3.17 mm | 210 | J/m | |
| 6.35 mm | 140 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 122 | °C | |
| 1.8 MPa, Unannealed | 113 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 87.8 to 93.3 | °C | |
| Drying Time | 2.0 to 24 | hr | |
| Rear Temperature | 193 | °C | |
| Middle Temperature | 216 | °C | |
| Front Temperature | 232 | °C | |
| Processing (Melt) Temp | 246 to 260 | °C | |
| Mold Temperature | 48.9 to 65.6 | °C | |
| Injection Pressure | 68.9 to 82.7 | MPa | |
| Injection Rate | Slow-Moderate | ||
| Back Pressure | 0.689 | MPa | |
| Screw Speed | 50 to 60 | rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® HDPE M80064 Series | SABIC Americas, Inc. | HDPE | SABIC® HDPE |
| SCHULABLEND® (ABS/PA) M/MK K2004 | A. Schulman Europe | ABS+Nylon | SCHULABLEND® |
| Complet® LGF20-PP | PlastiComp, Inc. | PP Homopolymer | Complet® |
| Flontech® FT-GL5-M5-1 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| Hax™ HF 018/9 | Fainplast Compounds S.r.l | Polyolefin, Unspecified | Hax™ |
