Order Products : sales@su-jiao.com
ICORENE® 3590
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | ICO Polymers EMEA, A Division of A. Schulman |
| Trademark: | ICORENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | K2gdNQ_ICORENE-3590.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ICORENE® 3590 is a linear low density polyethylene specifically developed for rotational moulding. ICORENE® 3590 is a very fast processing material suitable for use in many different applications. It has a good balance of properties such as toughness, easy flow and stiffness. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.935 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 9.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 56 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 17.0 | MPa | ASTM D638 |
| Flexural Modulus | 550 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Drop Impact Resistance 1(-20°C) | 160 | J/cm | Internal Method |
| Note Message | |
|---|---|
| 1 . | Based on ISO 6603 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 7046 Natural | Sylvin Technologies Incorporated | PVC, Flexible | Sylvin |
| ULTEM™ DT1810EV resin | SABIC Innovative Plastics | PEI | ULTEM™ |
| Nymax™ XGF 1200A 55 HS UV BLACK | PolyOne Corporation | Nylon 66 | Nymax™ |
| DENYL 66 3010 | Vamp Tech | Nylon 66 | DENYL |
| HIDEN® VH035 | YUHWA Korea Petrochemical Ind. Co., Ltd. | UHMWPE | HIDEN® |
