Order Products : sales@su-jiao.com
Network Polymers SMMA MS 221
| Category: | Acrylic (SMMA) , Styrene Methyl Methacrylate Acrylic Copolymer |
| Manufacturer: | Network Polymers, Inc. |
| Trademark: | Network Polymers SMMA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PI8n8Y_Network-Polymers-SMMA-MS-221.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Network Polymers SMMA MS 221 is a Styrene Methyl Methacrylate Acrylic Copolymer product. It is available in North America. Primary characteristic: copolymer. |
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.08 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) 1(200°C/5.0 kg) | 1.9 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.20 to 0.60 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.10 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 70 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield) | 57.9 | MPa | ASTM D638 |
| Tensile Elongation 3(Yield) | 2.1 | % | ASTM D638 |
| Flexural Modulus | 3100 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm) | 21 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 106 | °C | ASTM D1525 4 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Transmittance | 91.3 | % | ASTM D1003 |
| Note Message | |
|---|---|
| 1 . | Procedure A |
| 2 . | 51 mm/min |
| 3 . | 51 mm/min |
| 4 . | Rate B (120°C/h), Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SAXAMID™ 236Q33 | SAX Polymers | Nylon 66 | SAXAMID™ |
| Witcom PA66 3A/2L1 | Witcom Engineering Plastics B.V. | Nylon 66 | Witcom PA66 |
| APICAL 50NP | Kaneka North America LLC | Film, PI | APICAL |
| Ferro PP TPP40AC38WH | Ferro Corporation | PP Homopolymer | Ferro PP |
| Plenco 05350 (Compression) | Plastics Engineering Co. | Phenolic | Plenco |
