Order Products : sales@su-jiao.com
Ghaed ABS ABS-ER-72M
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Ghaed Basir Petrochemicals Co. |
| Trademark: | Ghaed ABS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IIepR1_Ghaed-ABS-ABS-ER-72M.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Classification: General purpose>Extrusion grade Characteristic: Extrusion grade, High rigidity& high impact strength, Low Heat Impact Strength. Application: Refrigerator interior container and door liner(HCFC-141b Blowing agent use) and etc. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (220°C/10.0 kg) | 3.0 - 8.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.40 - 0.70 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 100 - 120 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, 23°C) | > 41.2 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, 23°C) | > 18 | % | ASTM D638 |
| Flexural Modulus 3(23°C) | > 1770 | MPa | ASTM D790 |
| Flexural Strength 4(23°C) | > 60.8 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact 5 | > 33 | kJ/m² | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | > 84.0 | °C | ASTM D648 |
| Vicat Softening Temperature | > 92.0 | °C | ASTM D1525 6 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (3.20 mm) | HB | UL 94 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 - 85.0 | °C | |
| Drying Time | 3.0 | hr | |
| Cylinder Zone 1 Temp. | 190 - 210 | °C | |
| Cylinder Zone 2 Temp. | 210 - 230 | °C | |
| Cylinder Zone 3 Temp. | 220 - 240 | °C | |
| Cylinder Zone 4 Temp. | 225 - 245 | °C | |
| Cylinder Zone 5 Temp. | 225 - 245 | °C | |
| Adapter Temperature | 225 - 245 | °C | |
| Die Temperature | 220 - 245 | °C | |
| Take-Off Roll | 50.0 - 90.0 | °C |
| Extrusion instructions |
|---|
| Compression Ratio: 2.5:1 to 3:1L/D Ratio: >30:1Zone 6: 225 to 245°CZone 7: 225 to 245°CScreen Pack Mesh (2 layer): # 40 / #80 / #80 / #40Die Lip Thickness (mm): 3.2-4.0Head pressure: 140 bar |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 2.8 mm/min |
| 4 . | 2.8 mm/min |
| 5 . | 6.4mm |
| 6 . | 速率 A (50°C/h), 载荷2 (50N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Bergadur™ PB40 MI20 GR003 | PolyOne Corporation | PBT | Bergadur™ |
| Fiberfil® J-60/20/E8/M | Fiberfil® Engineered Plastics Inc. | PP Homopolymer | Fiberfil® |
| Grilamid® 1SBVX-50H LDS black | EMS-GRIVORY | Nylon 1010 | Grilamid® |
| Hostacom TRC 352N C12546 | LyondellBasell Industries | PP Copolymer | Hostacom |
| Dapol® D500 | Fudow Co., Ltd. | DAP | Dapol® |
