Order Products : sales@su-jiao.com
RTP 2740 S-60A Z
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GyKNrE_RTP-2740-S-60A-Z.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| FDA Compliant Ingredients |
| General Information | |
|---|---|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.16 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 1.5 to 2.5 | % | ASTM D955 |
| Moisture Content | 0.040 | % |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peel Strength | |||
| PP 1 | > 6.1 | kN/m | |
| PP (30% VLF) 2 | > 6.1 | kN/m | |
| PP (50% VLF) 3 | 4.2 | kN/m |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 60 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 4(100% Strain, 3.18 mm) | 2.76 | MPa | ASTM D412 |
| Tensile Strength 5(Break, 3.20 mm) | 6.21 | MPa | ASTM D412 |
| Tensile Elongation 6(Break) | 500 | % | ASTM D412 |
| Tear Strength 7 | 31.5 | kN/m | ASTM D624 |
| Compression Set 8 | ASTM D395B | ||
| 23°C, 22 hr | 16 | % | |
| 70°C, 22 hr | 40 | % |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm, ** Values per RTP Company testing.) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 76.7 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Processing (Melt) Temp | 163 to 204 | °C | |
| Mold Temperature | 15.6 to 37.8 | °C |
| Note Message | |
|---|---|
| 1 . | 90°, 20 in/min, RTP 55, Overmold Failure |
| 2 . | 90°, 20 in/min, RTP 55, Overmold Failure |
| 3 . | 90°, 20 in/min, RTP 55, Interface Failure |
| 4 . | Die C, 510 mm/min |
| 5 . | Die C, 500 mm/min |
| 6 . | Die C, 500 mm/min |
| 7 . | Die C |
| 8 . | Type 2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| New-prene™ 7040N | Total Polymer Vision (Suzhou) Co., LTD | PP+EPDM | New-prene™ |
| ANYPOL SE-300LL | SH Energy & Chemical | PS (EPS) | ANYPOL |
| Celstran® PP-GF30-10 AD 3019 Black | Celanese Corporation | PP, Unspecified | Celstran® |
| Hifax DRL 781P | LyondellBasell Industries | TPO (POE) | Hifax |
| Kemcor LD 4203 | Qenos Pty Ltd | LDPE | Kemcor |
