Order Products : sales@su-jiao.com
Dynacom 304-G15
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Dynachem Co. Ltd. |
| Trademark: | Dynacom |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Gxkpu9_Dynacom-304-G15.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Dynacom 304-G15 is a Polyamide 66 (Nylon 66) material. It is available in Asia Pacific. Primary attribute of Dynacom 304-G15: Flame Rated. |
| General Information |
|---|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Specific Gravity | 1.48 | -- | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow 1 | 0.80 to 1.2 | -- | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.90 | -- | % | ASTM D570 |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Rockwell Hardness (R-Scale) | 120 | -- | ASTM D785 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Strength 2 | 113 | 88.0 | MPa | ASTM D638 |
| Tensile Elongation 3(Break) | 5.0 | 5.0 | % | ASTM D638 |
| Flexural Modulus 4 | 5680 | 3300 | MPa | ASTM D790 |
| Flexural Strength 5 | 176 | 132 | MPa | ASTM D790 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Notched Izod Impact (23°C, 3.20 mm) | 59 | 78 | J/m | ASTM D256 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 220 | -- | °C | ASTM D648 |
| Vicat Softening Temperature | 240 | -- | °C | ASTM D1525 6 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume Resistivity | 8.0E+14 | -- | ohms·cm | ASTM D257 |
| Dielectric Strength (1.00 mm) | 23 | -- | kV/mm | ASTM D149 |
| Arc Resistance | 70.0 | -- | sec | ASTM D495 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating (0.0313 mm) | V-0 | -- | UL 94 |
| Additional Information | Dry | Conditioned | Unit | |
|---|---|---|---|---|
| Conditioned Moisture Content | -- | 1.5 | % |
| Note Message | |
|---|---|
| 1 . | Thickness: 2 to 3 mm |
| 2 . | 5.0 mm/min |
| 3 . | 5.0 mm/min |
| 4 . | 3.0 mm/min |
| 5 . | 3.0 mm/min |
| 6 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 9711-70 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Badamid® B70 TM-Z3 | Bada AG | Nylon 6 | Badamid® |
| HiFill® PEEK CF15 A | Techmer Engineered Solutions | PEEK | HiFill® |
| Plenco 01501 (Compression) | Plastics Engineering Co. | Polyester, TS | Plenco |
| TECHNYL® A 218 V25 BLACK 51 | Solvay Engineering Plastics | Nylon 66 | TECHNYL® |
