Order Products : sales@su-jiao.com

Miramid® FX30C

Category:	Nylon 6 , Polyamide 6
Manufacturer:	BASF Leuna GmbH
Trademark:	Miramid®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	GKtvbM_Miramid-FX30C.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Miramid® FX30C is a Polyamide 6 (Nylon 6) material filled with 30% mineral. It is available in Europe for injection molding.

Important attributes of Miramid® FX30C are:

Chemical Resistant

Crystalline

Good Aesthetics

Good Dimensional Stability

Good Stiffness

Typical applications include:

Automotive

Electrical/Electronic Applications

Housings

General Information
Filler / Reinforcement	Mineral, 30% Filler by Weight
Additive	Mold Release
Features	Crystalline Fuel Resistant Good Dimensional Stability Good Flow Good Stiffness Good Surface Finish Grease Resistant Low Warpage Oil Resistant Solvent Resistant
Uses	Automotive Applications Connectors Housings
Forms	Granules
Processing Method	Injection Molding
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1)

Physical	Dry	Conditioned	Unit	Test Method
Density	1380	--	kg/m³	ISO 1183 ¹
Water Absorption				ISO 62 ²
Saturation	6.3	--	%
Equilibrium	2.0	--	%
Viscosity number	150	--	cm³/g	ISO 307, 1157, 1628 ³

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile modulus	4500	1500	MPa	ISO 527-2 ⁴
Tensile Stress (Break)	85.0	45.0	MPa	ISO 527-2 ⁵
Tensile Strain (Break)	10	50	%	ISO 527-2 ⁶

Impact	Dry	Conditioned	Unit	Test Method
Charpy notched impact strength				ISO 179/1eA ⁷
-30°C	3.00	--	kJ/m²
23°C	3.50	5.00	kJ/m²
Charpy impact strength				ISO 179/1eU ⁸
-30°C	No Break	--
23°C	No Break	No Break

Thermal	Dry	Conditioned	Unit	Test Method
Deflection Temperature Under Load				ISO 75-2 ⁹
0.45 MPa	180	--	°C
1.8 MPa	70.0	--	°C
Melting Temperature (DSC)	220	--	°C	ISO 3146

Electrical	Dry	Conditioned	Unit	Test Method
Volume resistivity	1.0E+13	1.0E+10	ohms·m	IEC 60093 ¹⁰
Dielectric Constant (1 MHz)	3.50	6.20		IEC 60250
Dissipation Factor (1 MHz)	0.020	0.20		IEC 60250 ¹¹
Comparative tracking index	450	--		IEC 60112 ¹²

Injection	Dry	Unit
Processing (Melt) Temp	260 to 290	°C
Mold Temperature	80.0 to 100	°C

Note Message
1 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
2 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
3 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
4 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
5 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
6 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
7 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
8 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
9 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
10 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
11 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
12 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.

Resin Grade	Manufacturer	Category	Trademark
Bergamid™ A700 G30 H (f1)	PolyOne Corporation	Nylon 66	Bergamid™
Epoxies, Ect. 10-3046	Epoxies, Etc.	Epoxy	Epoxies, Ect.
Lotrène® LLDPE Q2018C	QATOFIN Company Limited	LLDPE	Lotrène® LLDPE
LG ASA LI913-H	LG Chem Ltd.	ASA	LG ASA
CP PRYME® Polystyrene PS100HI-3M	Chase Plastics Services Inc.	PS (HIPS)	CP PRYME® Polystyrene