Order Products : sales@su-jiao.com

VECTOR® 4411

Category:	SIS , Styrene Isoprene Styrene Block Copolymer
Manufacturer:	Dexco Polymers LP
Trademark:	VECTOR®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	nimOVI_VECTOR-4411.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Linear, pure triblock copolymer Contains <1% diblock High styrene, high modulus copolymer Outstanding thermal stability Outstanding melt processability Complies with U.S. FDA 21 CFR 177.1810; Consult the regulations for complete details VECTOR 4411 is a linear, pure SIS triblock copolymer. It is a high styrene, low viscosity product. It is a high modulus and creep resistant SIS copolymer. It is a high performance, flexible thermoplastic resin that can be blended with medium or low styrene SIS and/or SBS copolymers. It is designed for use as a compatibilizer in styrenic/olefinic blends. It has good physical properties and outstanding melt processability.

Message

Linear, pure triblock copolymer

Contains <1% diblock

High styrene, high modulus copolymer

Outstanding thermal stability

Outstanding melt processability

Complies with U.S. FDA 21 CFR 177.1810; Consult the regulations for complete details

VECTOR 4411 is a linear, pure SIS triblock copolymer. It is a high styrene, low viscosity product. It is a high modulus and creep resistant SIS copolymer. It is a high performance, flexible thermoplastic resin that can be blended with medium or low styrene SIS and/or SBS copolymers. It is designed for use as a compatibilizer in styrenic/olefinic blends. It has good physical properties and outstanding melt processability.

General Information
Features	Block Copolymer Low viscosity Workability, good Good creep resistance Good flexibility Thermal stability, good
Uses	Mixing
Agency Ratings	FDA 21 CFR 177.1810
Forms	Particle

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.960	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)	40	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 1 sec)	87		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (300% Strain)	8.96	MPa	ASTM D412
Tensile Strength (Yield)	20.7	MPa	ASTM D412
Tensile Elongation (Break)	750	%	ASTM D412

Additional Information
Styrene, Dexco Test Method: 44% Wt.Diblock Content, Dexco Test Method: <1% Wt.Ash, ASTM D1416: 0.2% Wt.

Resin Grade	Manufacturer	Category	Trademark
WELLAMID Nylon 6000 GV 30 HWCP	CP-Polymer-Technik GmbH & Co. KG	Nylon 6	WELLAMID Nylon
Geon™ Vinyl Rigid Extrusion L0659	PolyOne Corporation	PVC, Rigid	Geon™ Vinyl Rigid Extrusion
HiFill® HDPE GF15	Techmer Engineered Solutions	HDPE	HiFill®
LNP™ THERMOCOMP™ FX93387L compound	SABIC Innovative Plastics	PE, Unspecified	LNP™ THERMOCOMP™
POLYFLON™ M-15X	DAIKIN AMERICA, INC.	PTFE	POLYFLON™