Order Products : sales@su-jiao.com
Marlex® 1009
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Chevron Phillips Chemical Company LLC |
| Trademark: | Marlex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FyMIGb_Marlex-1009.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Marlex® 1009 is a Low Density Polyethylene material. It is available in Latin America or North America for extrusion or injection molding. Important attributes of Marlex® 1009 are:
Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.917 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 16 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 46 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Compression Molded) | 9.00 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, Compression Molded) | 500 | % | ASTM D638 |
| Flexural Modulus - Tangent 3(Compression Molded) | 200 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -54.0 | °C | ASTM D746A |
| Vicat Softening Temperature | 85.0 | °C | ASTM D1525 4 |
| Note Message | |
|---|---|
| 1 . | Type IV, 51 mm/min |
| 2 . | Type IV, 51 mm/min |
| 3 . | 13 mm/min |
| 4 . | Rate A (50°C/h), Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sumitomo Silicone SI 9550 | Sumitomo Bakelite North America, Inc. | Silicone | Sumitomo Silicone |
| Hyosung Polyketone M330A | Hyosung Corporation | PK-Aliphatic | Hyosung Polyketone |
| Hyundai EP Breathable AT830/2102 | HYUNDAI EP Co., Ltd. | Polyolefin, Unspecified | Hyundai EP Breathable |
| Plaslube® PA6/6 GF33 TL10 HS | Techmer Engineered Solutions | Nylon 66 | Plaslube® |
| Delene 1160 | Shanghai Lin Gen Rubber Materials Co., Ltd. | TPE | Delene |
