Order Products : sales@su-jiao.com
Braskem PP PH 1721
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Braskem |
| Trademark: | Braskem PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Fc1FIr_Braskem-PP-PH-1721.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PH 1721 is a low melt flow rate polypropylene with anti-gasfading stabilization package and suitable to continuous filament and staple fiber process, due to its molecular weight distribution. It has a very good balance of toughness and elongation. This resin could be also used for injection moulding process. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.905 | g/cm³ | ASTM D792, ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 22 | g/10 min | ASTM D1238, ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness | |||
| R-Scale, Injection Molded | 103 | ASTM D785 | |
| R-Scale | 103 | ISO 2039-2 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 35.0 | MPa | ASTM D638, ISO 527-2 |
| Tensile Elongation (Yield, Injection Molded) | 8.0 | % | ASTM D638, ISO 527-2 |
| Flexural Modulus | |||
| 1% Secant : Injection Molded | 1500 | MPa | ASTM D790 |
| Injection Molded | 1500 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| 23°C, Injection Molded | 20 | J/m | ASTM D256 |
| 23°C, Injection Molded | 2.9 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, Unannealed, Injection Molded | 103 | °C | ASTM D648 |
| 0.45 MPa, Unannealed | 103 | °C | ISO 75-2/B |
| Vicat Softening Temperature | 153 | °C | ISO 306/A, ASTM D1525 1 |
| Note Message | |
|---|---|
| 1 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TYRIL™ 867 E UV | Trinseo | SAN | TYRIL™ |
| FM® 6555-1 | Cytec Industries Inc. | Adhesive | FM® |
| INEOS PP 100-GA01 | INEOS Olefins & Polymers Europe | PP Homopolymer | INEOS PP |
| SCHULAMID® 66 GF 33 FC | A. Schulman Europe | Nylon 66 | SCHULAMID® |
| Stat-Tech™ ST7300-0005 | PolyOne Corporation | ABS | Stat-Tech™ |
