Order Products : sales@su-jiao.com
Tectron H2457
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | TECTRON Systems Pte Ltd |
| Trademark: | Tectron |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Eyxr14_Tectron-H2457.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Economical Grade A thermoplastic vulcanizate with excellent heat and low temperature resistance. It can withstand temperature ranging from -50°C to 135°C. Tectron H series are available in concentrate and compound with hardness ranging from 45A - 90A. The concentrate is designed for compounders to obtain TPVs with the addition of PP and other chemicals. It can also be used as an additive to enhance the overall properties of various polymers. It can be processed by conventional plastics machines i.e. injection molding and extrusion. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.02 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 75 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 2.32 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 6.87 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 970 | % | ASTM D412 |
| Compression Set | ASTM D395 | ||
| 25°C, 22 hr | 36 | % | ASTM D395 |
| 100°C, 22 hr | 72 | % | ASTM D395 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 70.0 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 110 - 120 | °C | |
| Middle Temperature | 120 - 130 | °C | |
| Front Temperature | 130 - 140 | °C | |
| Nozzle Temperature | 140 - 150 | °C | |
| Mold Temperature | 30.0 - 40.0 | °C | |
| Back Pressure | 0.00 - 0.0800 | MPa | |
| Screw Speed | 35 - 110 | rpm |
| Injection instructions |
|---|
| Injection Speed: 20 to 80 mm/s1st Stage - Boost Pressure: 1350 to 6000Hold Time ( thick part): 2 to 15 sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sarlink® TPE ME-2259D BLK 288 | Teknor Apex Company | TPE | Sarlink® TPE |
| TEDUR® L 9424-1 | ALBIS PLASTIC GmbH | PPS | TEDUR® |
| Silopren® LSR 4030 | Momentive Performance Materials Inc. | Silicone Rubber, LSR | Silopren® |
| Flontech® FT-COND-6 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| Sylvin 8773-60D Brown 7379 | Sylvin Technologies Incorporated | PVC, Rigid | Sylvin |
