Order Products : sales@su-jiao.com

TOTAL Polyethylene HDPE 8183

Category:	HDPE, MMW , High Density (MMW) Polyethylene
Manufacturer:	TOTAL Refining & Chemicals
Trademark:	TOTAL Polyethylene
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Dcf4UD_TOTAL-Polyethylene-HDPE-8183.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

TOTAL Polyethylene 8183 is a high density (MMW) polyethylene material,. This product is available in North America and is processed by blow molding.

The main features of TOTAL Polyethylene 8183 are:

Comply with REACH standard

high gloss

accessible food

excellent release agent

Typical application areas include:

packing

food contact applications

medical/health care

bottle

container

General Information
Features	Highlight Compliance of Food Exposure Good demoulding performance Narrow molecular weight distribution Medium molecular weight
Uses	Packaging Industrial container Bottle Food packaging
Agency Ratings	ASTM D 1248, III, Class A, Cat. 4 DMF not rated EC 1907/2006 (REACH) FDA 21 CFR 177.1520(c) 2.1 FDA 21 CFR 177.1520(c) 2.2 USP Class VI
Forms	Particle
Processing Method	Blow molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.945	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR)			ASTM D1238
190°C/2.16 kg	0.55	g/10 min	ASTM D1238
190°C/21.6 kg	19	g/10 min	ASTM D1238
190°C/5.0 kg	1.9	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance (10% Igepal)	200	hr	ASTM D1693B

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (L-Scale)	41		ASTM D785
Durometer Hardness (Shore D)	62		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus - 2% Secant ¹	758	MPa	ASTM D638
Tensile Strength ²(Yield)	22.1	MPa	ASTM D638
Tensile Elongation ³(Break)	500	%	ASTM D638
Flexural Modulus	965	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	125	°C	ASTM D1525
Peak Melting Temperature	129	°C	ASTM D3418
CLTE - Flow	1.8E-4	cm/cm/°C	ASTM D696

Additional Information
Elongation at Break, ASTM D638, Type IV, 2 in/min: >500%Heat Distortion Temperature, ASTM D648: 158°F

Note Message
1 .	Type 4, 51mm/min
2 .	Type 4, 51mm/min
3 .	Type 4, 51mm/min

Resin Grade	Manufacturer	Category	Trademark
Sindustris PC GP2301	Sincerity Australia Pty Ltd.	PC	Sindustris PC
EXCELINK 3400B	JSR Corporation	TPV	EXCELINK
Hifax Premium TKC 176P	LyondellBasell Industries	PP Copolymer	Hifax
POCAN® ECO T 3240 000000	LANXESS Corporation	PBT+PET	POCAN®
ESTOPLAST XU 325GY01	Ester Industries Ltd.	Nylon 6	ESTOPLAST XU