Order Products : sales@su-jiao.com
Larpeek 10
| Category: | PEEK , Polyetheretherketone |
| Manufacturer: | LATI S.p.A. |
| Trademark: | Larpeek |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Calr48_Larpeek-10.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Polyetheretherketone (PEEK). UL94 V-0 classified, halogens free. Very good chemical resistance. Very good thermal resistance. Low smoke toxicity index and optical density. |
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.30 | g/cm³ | ISO 1183 |
| Molding Shrinkage 1 | ISO 294-4 | ||
| Across Flow : 2.00 mm | 0.90 to 1.3 | % | |
| Flow : 2.00 mm | 0.80 to 1.2 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | ISO 527-2/1 | ||
| 23°C | 3700 | MPa | |
| 60°C | 3700 | MPa | |
| 90°C | 3650 | MPa | |
| 120°C | 3600 | MPa | |
| 150°C | 3200 | MPa | |
| Tensile Stress | ISO 527-2/5 | ||
| Yield, 23°C | 105 | MPa | |
| Yield, 60°C | 85.0 | MPa | |
| Yield, 90°C | 65.0 | MPa | |
| Yield, 120°C | 55.0 | MPa | |
| Yield, 150°C | 25.0 | MPa | |
| Break, 23°C | 90.0 | MPa | |
| Break, 60°C | 80.0 | MPa | |
| Break, 90°C | 65.0 | MPa | |
| Break, 120°C | 55.0 | MPa | |
| Break, 150°C | 25.0 | MPa | |
| Tensile Strain | ISO 527-2/5 | ||
| Yield, 23°C | 5.0 | % | |
| Yield, 60°C | 5.0 | % | |
| Yield, 90°C | 5.0 | % | |
| Yield, 120°C | 6.0 | % | |
| Yield, 150°C | 8.0 | % | |
| Break, 23°C | 30 | % | |
| Break, 60°C | 30 | % | |
| Break, 90°C | 30 | % | |
| Break, 120°C | 35 | % | |
| Break, 150°C | 45 | % |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 8.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (23°C) | No Break | ISO 179/1eU | |
| Notched Izod Impact (23°C, 3.20 mm) | No Break | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 195 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 165 | °C | ISO 75-2/A |
| Continuous Use Temperature 2 | 210 | °C | |
| Vicat Softening Temperature | > 300 | °C | ISO 306/B50 |
| CLTE - Flow (30 to 100°C) | 6.0E-5 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Comparative Tracking Index 3(Solution A) | 175 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 0.750 mm | V-1 | ||
| 1.50 mm | V-0 | ||
| 3.00 mm | V-0 | ||
| Glow Wire Flammability Index (2.00 mm) | 960 | °C | IEC 60695-2-12 |
| Glow Wire Ignition Temperature (1.00 mm) | 875 | °C | IEC 60695-2-13 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 to 150 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 360 to 390 | °C | |
| Mold Temperature | 170 to 200 | °C | |
| Injection Rate | Moderate-Fast |
| Note Message | |
|---|---|
| 1 . | at 60 Mpa of cavity pressure |
| 2 . | 20,000 hr |
| 3 . | Without Surfactant |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEREZ PA 6 7200 | TER HELL PLASTIC GMBH | Nylon 6 | TEREZ PA 6 |
| IDI STC 3142A | IDI Composites International | Vinyl Ester | IDI STC |
| LNP™ COLORCOMP™ A1000H compound | SABIC Innovative Plastics | ABS | LNP™ COLORCOMP™ |
| Omnix® LF-4050 BK 000 | Solvay Specialty Polymers | HPPA | Omnix® |
| ALTECH® PA66 ECO 1000/618 IM | ALBIS PLASTIC GmbH | Nylon 66 | ALTECH® PA66 |
