Order Products : sales@su-jiao.com
ADDILENE PMD 50218
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | ADDIPLAST |
| Trademark: | ADDILENE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CEL4Ah_ADDILENE-PMD-50218.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ADDILENE PMD 50218 is a Polypropylene material. It is available in Africa & Middle East, Asia Pacific, Europe, or Latin America. Important attributes of ADDILENE PMD 50218 are:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.940 | g/cm³ | ISO 1183/A |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 12 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 70 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 15.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 100 | % | ISO 527-2 |
| Flexural Modulus | 1200 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 5.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | No Break | ISO 179/1eU | |
| Notched Izod Impact Strength | 5.0 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 53.0 | °C | ISO 75-2/Af |
| Vicat Softening Temperature | 148 | °C | ISO 306/A50 |
| Melting Temperature (DSC) | 165 | °C | ISO 3146 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+13 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | ohms·cm | IEC 60093 |
| Electric Strength | 43 | kV/mm | IEC 60243-1 |
| Comparative Tracking Index (Solution A) | 600 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.60 mm) | V-2 | UL 94 | |
| Glow Wire Ignition Temperature | 960 | °C | IEC 60695-2-13 |
| Oxygen Index | 25 | % | ISO 4589-2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Silplus® 70 MP | Momentive Performance Materials Inc. | Silicone Rubber, HTV | Silplus® |
| NYCOA Polyamide 2025 | Nycoa (Nylon Corporation of America) | Nylon 6 | NYCOA Polyamide |
| ALTECH® POM A 3030/500 GB30 | ALBIS PLASTIC GmbH | Acetal (POM) Copolymer | ALTECH® POM |
| Braskem PE HS5407V1 | Braskem | HDPE | Braskem PE |
| Iupilon® GSH2030R2 K807 | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
