Order Products : sales@su-jiao.com
Tuftec™ P1083
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | AKelastomers |
| Trademark: | Tuftec™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ig2lEe_Tuftec-P1083.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Tuftec™ P1083 is a Styrene Ethylene Butylene Styrene Block Copolymer (SEBS) material. It is available in Asia Pacific or Europe. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.890 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 3.0 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 56 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 3.00 | MPa | ISO 37 |
| Tensile Stress 1(Break) | 9.00 | MPa | ISO 37 |
| Tensile Elongation 2(Break) | 700 | % | ISO 37 |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| Styrene/Rubber ratio | 20/80 | Internal Method |
| Note Message | |
|---|---|
| 1 . | Type 1A, 500 mm/min |
| 2 . | Type 1A, 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RALUPOL® UP 4385 | RASCHIG GmbH | Polyester, TS | RALUPOL® |
| TES J-1200/10 GY9687 | Techmer Engineered Solutions | ABS | TES |
| ICORENE® 4007 | ICO Polymers EMEA, A Division of A. Schulman | PP Impact Copolymer | ICORENE® |
| LEXAN™ ML7664 resin | SABIC Innovative Plastics Asia Pacific | PC | LEXAN™ |
| MAXATEL® AC800AVL-NAT | Pier One Polymers, Inc. | Acetal (POM) Copolymer | MAXATEL® |
