Order Products : sales@su-jiao.com
Zhongfa PP pp8
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Yuyao Zhongfa Engineering Plastics Co. Ltd. |
| Trademark: | Zhongfa |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | C7HgPR_Zhongfa-PP-pp8.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Zhongfa PP pp8 is a polypropylene material and contains 40% mineral fillers. This product is available in the Asia-Pacific region and is processed by injection molding. The main features of Zhongfa PP pp8 are:
Typical application areas include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.25 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 7.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.60 - 0.80 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 103 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 41.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 3.0 | % | ASTM D638 |
| Flexural Modulus | 2800 | MPa | ASTM D790 |
| Flexural Strength | 42.0 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 160 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 140 | °C | ASTM D648 |
| Additional Information |
|---|
| Aging Resistance at 150°C: 750 hrNotched Izod Impact, ASTM D256: 35 kJ/m²Unnotched Izod Impact, ASTM D256: 14 kJ/m² |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 - 95.0 | °C | |
| Drying Time | 2.0 - 3.0 | hr | |
| Processing (Melt) Temp | 195 - 225 | °C | |
| Mold Temperature | 45.0 - 80.0 | °C | |
| Injection Pressure | 60.0 - 90.0 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PP GP1001FC | Sincerity Australia Pty Ltd. | PP, Unspecified | Sindustris PP |
| Spartech Polycom PP5930 | Spartech Polycom | PP, Unspecified | Spartech |
| ENGAGE™ 7457 | The Dow Chemical Company | TPO (POE) | ENGAGE™ |
| Wuxi Jiahong EB-306 | Wuxi Jiahong Plastics Technology CO., Ltd. | PVC, Unspecified | Wuxi Jiahong |
| Durethan® BCF 30 X H2.0 901510 | LANXESS Corporation | Nylon 6 | Durethan® |
