Order Products : sales@su-jiao.com

ALKAMIX™ MB6003

Category:	LLDPE , Linear Low Density Polyethylene
Manufacturer:	Qenos Pty Ltd
Trademark:	ALKAMIX™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	CI6HeG_ALKAMIX-MB6003.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
ALKAMIX MB6003 is an antistatic masterbatch based on an Ethoxylated Alkyl Amine compound at a concentration of 2 percent. ALKAMIX MB6003 can be added to polyethylene during extrusion to assist in dissipation of static charge build-up during subsequent conversion of the film. The recommended addition level is 3 percent for gauges less than 100 micron and 2 percent for gauges greater than 100 micron. However, care must be taken when added to very high slip film grades, as both slip (Erucamide or Oleamide) and the antistatic additive (an ethoxylated amine) are surface migratory and their combination on the surface of the film could result in problems with treatment, sealing, printing etc... The maximum level of addition of MB6003 based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 4 percent, when added to a polyethylene formulation free of any other additives.

Message

ALKAMIX MB6003 is an antistatic masterbatch based on an Ethoxylated Alkyl Amine compound at a concentration of 2 percent.

ALKAMIX MB6003 can be added to polyethylene during extrusion to assist in dissipation of static charge build-up during subsequent conversion of the film. The recommended addition level is 3 percent for gauges less than 100 micron and 2 percent for gauges greater than 100 micron. However, care must be taken when added to very high slip film grades, as both slip (Erucamide or Oleamide) and the antistatic additive (an ethoxylated amine) are surface migratory and their combination on the surface of the film could result in problems with treatment, sealing, printing etc...

The maximum level of addition of MB6003 based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 4 percent, when added to a polyethylene formulation free of any other additives.

General Information
Additive	Antistatic (2%)
Features	Antistatic
Uses	Blending
Forms	Pellets

Resin Grade	Manufacturer	Category	Trademark
Ravago Compounds HM-289	Ravago Manufacturing Americas, LLC	LLDPE	Ravago Compounds
StyroTalc™ 51	Heritage Plastics, Inc.	PS (GPPS)	StyroTalc™
Network Polymers Polyester 60 3301	Network Polymers, Inc.	Polyester, TP	Network Polymers Polyester
Gallonprene® GP520-5503	Shenzhen Sungallon Rubber & Plastic Corporation Limited	TPE	Gallonprene®
KEBAFORM® C 909 WR	BARLOG plastics GmbH	Acetal (POM) Copolymer	KEBAFORM® C