Ajedium™ Films -- Halar® 500LC Datasheet,ECTFE,Solvay Specialty Polymers-SHANGHAI SUSHENG

Message
Halar® ECTFE is a semi-crystaline fluoropolymer with a chemical structure of a 1:1 alternating copolymer of ethylene and chlorotrifluoroethylene. Halar® film is a strong, hard, tough, abrasion resistant film that retains its useful properties over a broad range of temperatures. Its low temperature properties, especially those related to impact, are particularly outstanding. Halar® films have demonstrated excellent weathering properties and are extremely resistant to UV radiation and common industrial and environmental pollutants. The film also is an excellent barrier to water vapor at a wide range of temperatures. This lower permeability is a key advantage in applications where protection from water, oxygen, or other small gas molecules is required.

General Information
Features	Low viscosity
Uses	Electrical/Electronic Applications Industrial application Aerospace applications Outdoor application

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.68	g/cm³	ASTM D792
Water Absorption (Equilibrium)	< 0.10	%	ASTM D570

Mechanical	Nominal Value	Unit	Test Method
Coefficient of Friction			ASTM D1894
With self-dynamics	0.20		ASTM D1894
With Self-Static	0.20		ASTM D1894
Taber Abrasion Resistance (1000 Cycles, 500 g, CS-17 Wheel)	5.00	mg

Films	Nominal Value	Unit	Test Method
Film Thickness - Tested	50	µm
secant modulus			ASTM D882
MD	1550	MPa	ASTM D882
TD	1500	MPa	ASTM D882
Tensile Strength			ASTM D882
MD : Fracture	53.0	MPa	ASTM D882
TD : Fracture	50.0	MPa	ASTM D882
Tensile Elongation			ASTM D882
MD : Fracture	280	%	ASTM D882
TD : Fracture	280	%	ASTM D882
Water Vapor Transmission Rate	1.6	g·mm/m²/atm/24 hr	ASTM F1249
Free Shrinkage (200°C)	4.4	%	ASTM D2732
Area coefficient	115	ft²/lb/mil

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	< -76.0	°C	ASTM D746A
Glass Transition Temperature	85.0	°C	DMA
Melting Temperature	242	°C	ASTM D3418
Peak Crystallization Temperature (DSC)	222	°C	ASTM D3418
CLTE - Flow	1.0E-4	cm/cm/°C	ASTM D696
Specific Heat (23°C)	962	J/kg/°C	ASTM D3418
Thermal Conductivity (40°C)	0.15	W/m/K	ASTM C177

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity ¹(23°C)	5.5E+16	ohms·cm	ASTM D257
Dielectric Strength (23°C, 3.20 mm)	14	kV/mm	ASTM D149
Dielectric Constant (23°C, 1 MHz)	2.57		ASTM D150

Flammability	Nominal Value	Unit	Test Method
Oxygen Index	52	%	ASTM D2863

Additional Information
Standard Thicknesses and Widths Widths are available from 22" (559 mm) to 56" (1422 mm). Products with widths <22 inches or >56 inches are available upon request. Tolerances for widths are +/- 4mm. For Halar® film, the standard thicknesses are 8 microns (0.3 mil) to 1016 microns (40 mil). Surface Finishes Standard surface finish is P/M (polished / matte). Custom finishes of P/P (polished / polished) and M/M (matte / matte) are available. Packaging Film is supplied in a roll form of high quality, cardboard core of 3" (76mm) or 6" (152mm). PVC cores are available upon request in 3" and 6" sizes. Labeling Products are labeled to comply with national and international standards. Labels include product grade, unique batch number, roll length, roll width, product thickness, and net weight.

Additional Information

Standard Thicknesses and Widths Widths are available from 22" (559 mm) to 56" (1422 mm). Products with widths <22 inches or >56 inches are available upon request. Tolerances for widths are +/- 4mm. For Halar® film, the standard thicknesses are 8 microns (0.3 mil) to 1016 microns (40 mil). Surface Finishes Standard surface finish is P/M (polished / matte). Custom finishes of P/P (polished / polished) and M/M (matte / matte) are available. Packaging Film is supplied in a roll form of high quality, cardboard core of 3" (76mm) or 6" (152mm). PVC cores are available upon request in 3" and 6" sizes. Labeling Products are labeled to comply with national and international standards. Labels include product grade, unique batch number, roll length, roll width, product thickness, and net weight.

Note Message
1 .	50% RH

Category:	ECTFE , Ethylene Chlorotrifluoroethylene Copolymer
Manufacturer:	Solvay Specialty Polymers
Trademark:	Ajedium™ Films
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	BWggbP_Ajedium-Films----Halar-500LC.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Axiall PVC 8757	Axiall Corporation	PVC, Flexible	Axiall PVC
Celstran® +PP-GF40-04CN15/10	Celanese Corporation	PP, Unspecified	Celstran®
Kepamid® 1325GF	Korea Engineering Plastics Co., Ltd	Nylon 6	Kepamid®
Laprene® 830000545	SO.F.TER. SPA	SEBS	Laprene®
InnoPlus HD6001C	PTT Global Chemical Public Company Limited	HDPE	InnoPlus