Order Products : sales@su-jiao.com

3M™ Dyneon™ Fluoroelastomer FPO 3631

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	3M Advanced Materials Division
Trademark:	3M™ Dyneon™ Fluoroelastomer
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	BHgv3E_3MDyneonFluoroelastomerFPO3631.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Dyneon Fluoroelastomer FPO 3631 is a medium fluorine content, peroxide curable grade, which has been designed and tested for 2 component injection moulding and standard injection overmoulding processes with DSM Stanyl® Polyamide 46. The product provides excellent physical properties and very broad chemical resistance. Special Features Composition: terpolymer of vinylidene fluoride, hexafluoropropylene and tetrafluoroethylene plus cure site monomer Process target: two-component moulding or injection overmoulding Excellent flow Excellent physical properties Good low temperature properties High resistance against chemical fluids Excellent scorch safety Typical Applications Dyneon Fluoroelastomer FPO 3631 can be used for wide range of applications where the elastomer needs to be combined with a stiffening carrier material from DSM Stanyl® Polyamide 46 and also a broad chemical resistance is needed.

Message

Dyneon Fluoroelastomer FPO 3631 is a medium fluorine content, peroxide curable grade, which has been designed and tested for 2 component injection moulding and standard injection overmoulding processes with DSM Stanyl® Polyamide 46. The product provides excellent physical properties and very broad chemical resistance.

Special Features

Composition: terpolymer of vinylidene fluoride, hexafluoropropylene and tetrafluoroethylene plus cure site monomer

Process target: two-component moulding or injection overmoulding

Excellent flow

Excellent physical properties

Good low temperature properties

High resistance against chemical fluids

Excellent scorch safety

Typical Applications
Dyneon Fluoroelastomer FPO 3631 can be used for wide range of applications where the elastomer needs to be combined with a stiffening carrier material from DSM Stanyl® Polyamide 46 and also a broad chemical resistance is needed.

General Information
Features	High liquidity Low temperature resistance Good chemical resistance Terpolymer
Appearance	White-like
Forms	Thick sheet
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.81	g/cm³	Internal method
Mooney Viscosity (ML 1+10, 121°C)	37	MU	Internal method
Fluorine Content	67	%	Internal method

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	75		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (100% Strain)	9.60	MPa	DIN 53504
Tensile Strength	15.2	MPa	DIN 53504
Tensile Elongation (Break)	200	%	DIN 53504
Compression Set ¹(200°C, 70 hr)	30	%	ASTM D395B

Thermal	Nominal Value	Unit
Glass Transition Temperature	-19.0	°C

Note Message
1 .	on buttons

Resin Grade	Manufacturer	Category	Trademark
TEREZ PC X 9005 GF 5	TER HELL PLASTIC GMBH	PC	TEREZ PC
Escorene™ Ultra LD 705.MJ Molding	ExxonMobil Chemical	EVA	Escorene™ Ultra
Hostacom M2 U02	LyondellBasell Industries	PP Homopolymer	Hostacom
LTP CT-1215	Chengdu Letian Plastics Co., Ltd	PPS	LTP
EnviroPro 2010TF40	West Michigan Compounding	PP Copolymer	EnviroPro