Order Products : sales@su-jiao.com

DAPCO™ 3008

Category:	Epoxy , Epoxy; Epoxide
Manufacturer:	Cytec Industries Inc.
Trademark:	DAPCO™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	P5gvQL_DAPCO-3008.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

DAPCO™ 3008 is a two-component, self-extinguishing epoxy filler.

Features & Benefits:
Cure at room temperature
Excellent adhesion to metal and wood
Very low water absorption
Good chemical resistance, especially to aircraft fluids
Can be nailed, threaded, countersunk, drilled, cut, etc. without cracking or chipping
100% solids
FAR 25.853

Suggested Applications:
DAPCO 3008 is commonly used for potting, stiffening and edge filling in honeycomb core.

General Information
Features	Good Adhesion Good Chemical Resistance High Stiffness Humidity Resistant Low Density Self Extinguishing
Uses	Adhesives Aerospace Applications Filling Applications Structural Parts
Agency Ratings	FAR 25.853
Appearance	Yellow
Forms	Paste
Processing Method	Potting

Physical	Nominal Value	Unit
Specific Gravity	0.449 to 0.513	g/cm³
Water Absorption (24 hr)	0.40	%

Hardness	Nominal Value	Unit
Durometer Hardness (Shore D)	60

Mechanical	Nominal Value	Unit
Flexural Modulus	1380	MPa
Compressive Strength	20.7	MPa

Flammability	Nominal Value
Flammability ¹	Self-extinguishing

Thermoset	Nominal Value
Thermoset Components
Hardener	Mix Ratio by Weight: 35
Resin	Mix Ratio by Weight: 100

Note Message
1 .	3 seconds

Resin Grade	Manufacturer	Category	Trademark
RTP 1400 AG-330	RTP Company	PESU	RTP
Formolene® 2550A	Formosa Plastics Corporation, U.S.A.	PP Impact Copolymer	Formolene®
Iupilon® GSH2010DR 9911A	Mitsubishi Engineering-Plastics Corp	PC	Iupilon®
Mablex 356	Ravago Group	PC+ABS	Mablex
POLYfill PPH GF5020 PD2	Polykemi AB	PP Homopolymer	POLYfill