Order Products : sales@su-jiao.com
Eleme HFG00346
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Eleme Petrochemical Company Ltd |
| Trademark: | Eleme |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AbLgGl_Eleme-HFG00346.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Co-extruded structures, lamination, liners, grocery bags, etc. |
| General Information | |
|---|---|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.946 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.32 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 25 | µm | |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 25 µm | 21.0 | MPa | |
| TD : Yield, 25 µm | 23.0 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 25 µm | 600 | % | |
| TD : Break, 25 µm | 850 | % | |
| Flexural Modulus | ASTM D790 | ||
| MD : 25 µm | 590 | MPa | |
| TD : 25 µm | 680 | MPa | |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 25 µm | 0.90 | g | |
| TD : 25 µm | 23 | g |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 121 | °C | ASTM D1525 1 |
| Note Message | |
|---|---|
| 1 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Matrixx WP63E20 | The Matrixx Group, Inc. | Nylon 6 | Matrixx |
| SNOLEN® EP 0.46/46 | JSC Gazprom neftekhim Salavat | HDPE | SNOLEN® |
| KRYSTALFLEX™ PE419 | Huntsman Corporation | PUR-Eth,aliphat | KRYSTALFLEX™ |
| INVISION™ HX 5145DU1A | A. Schulman Inc. | TPE | INVISION™ |
| LNP™ LUBRICOMP™ OCL36 compound | SABIC Innovative Plastics | PPS, Linear | LNP™ LUBRICOMP™ |
