Order Products : sales@su-jiao.com
DEXFLEX® 910
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | DEXFLEX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ADQTSA_DEXFLEX-910.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Dexflex 910 high melt flow, medium modulus, mineral-filled thermoplastic elastomeric olefin has a good balance of properties. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.938 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 25 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 17.9 | MPa | ASTM D638 |
| Flexural Modulus | 1200 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -30°C | 85 | J/m | ASTM D256 |
| 23°C | No Break | ASTM D256 |
| Additional Information |
|---|
| All testing performed according to Honda HES 2503 test methods. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| BESTNYL SE60VI01AH | Triesa Plastics | Nylon 66 | BESTNYL |
| ASTAMID™ MA3ZK | Marplex Australia Pty. Ltd. | Nylon 66 | ASTAMID™ |
| Kynar Flex® 2950-05 | Arkema | PVDF | Kynar Flex® |
| OmniCarb™ PC/ASA 220 UV | OMNI Plastics, LLC | ASA+PC | OmniCarb™ |
| FUDOWPREMIX® FP100F typeE | Fudow Co., Ltd. | Polyester, TS | FUDOWPREMIX® |
