Order Products : sales@su-jiao.com
Razalen® P121 TR40
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Razin™ Engineering Plastics |
| Trademark: | Razalen® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | A3kmUi_Razalen-P121-TR40.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Razalen P121 TR40 is a general purpose injection grade black color impact copolymer polypropylene reinforced with 40% talc. It combines good toughness as well as excellent processability chemical, and fatigue resistance. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.24 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 10 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.90 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 25.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 18 | % | ASTM D638 |
| Flexural Modulus | 2480 | MPa | ASTM D790 |
| Flexural Strength | 46.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -30°C | 13 | J/m | |
| 23°C | 18 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 118 | °C | |
| 1.8 MPa, Unannealed | 62.0 | °C | |
| Vicat Softening Temperature | 168 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 to 100 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Rear Temperature | 200 to 210 | °C | |
| Middle Temperature | 210 to 220 | °C | |
| Front Temperature | 220 to 230 | °C | |
| Processing (Melt) Temp | 220 to 240 | °C | |
| Mold Temperature | 40.0 to 80.0 | °C | |
| Injection Pressure | 50.0 to 140 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SIMONA® SIMOPOR-LIGHT | SIMONA AMERICA, Inc. | PVC, Unspecified | SIMONA® |
| Amodel® A-4122 NL WH 905 | Solvay Specialty Polymers | PPA | Amodel® |
| Axiall PVC 7803 | Axiall Corporation | PVC, Rigid | Axiall PVC |
| Sylvin 8356-75UV White 1555 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Elastocon® STK90X | Elastocon TPE Technologies | TPE | Elastocon® |
