Order Products : sales@su-jiao.com
KW Plastics KWR105
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | KW Plastics |
| Trademark: | KW Plastics |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9tRcmz_KW-Plastics-KWR105.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Copolymer High Density Polyethylene Post-Consumer Resin Injection Molding CHARACTERISTICS Utility |
| General Information | |
|---|---|
| Recycled Content |
|
| Features |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.950 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 4.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 20.7 | MPa | ASTM D638 |
| Flexural Modulus | 896 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 110 | J/m | ASTM D256 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Polypropylene | 15 | % | ASTM D5576 |
| Weight Loss on Heating (105°C) | < 0.10 | % | Internal Method |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Santoprene™ 201-64 | ExxonMobil Chemical | TPV | Santoprene™ |
| VECTRA® E531i | Celanese Corporation | LCP | VECTRA® |
| FHR Polypropylene AP7535-HS | Flint Hills Resources, LP | PP Impact Copolymer | FHR Polypropylene |
| 3M™ Dyneon™ Fluoroplastic FEP FLEX6305Z | 3M Advanced Materials Division | FEP | 3M™ Dyneon™ Fluoroplastic |
| Lifoflex® UV FLAM 50600 | Müller Kunststoffe GmbH | TPE | Lifoflex® |
