Order Products : sales@su-jiao.com
REVOLVE® M-638
| Category: | PE, Unspecified , Polyethylene |
| Manufacturer: | Matrix Polymers |
| Trademark: | REVOLVE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YqNg5p_REVOLVE-M-638.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Revolve M-638 is a rotational moulding polyethylene black grade. It has been designed to provide good flow characteristics and medium stiffness without compromising impact properties. It is advisable to use this grade for general purpose applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.935 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 7.0 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance | ASTM D1693 | ||
| 10% Igepal | 50.0 | hr | |
| 100% Igepal | > 1000 | hr |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 15.5 | MPa | ISO 527-2/50 |
| Flexural Modulus 1 | 625 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| ARM Impact (-40°C, 3.00 mm) | 75.0 | J |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 44.0 | °C | ISO 75-2/A |
| Note Message | |
|---|---|
| 1 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sarlink® TPV 2645 | Teknor Apex Company | TPV | Sarlink® TPV |
| Trexlink™ 6770 | Mitsubishi Chemical Performance Polymers, Inc. | TPE | Trexlink™ |
| Witcom PA6 4C+G-XHI | Witcom Engineering Plastics B.V. | Nylon 6 | Witcom PA6 |
| EPO-TEK® H77 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| LNP™ VERTON™ UV00AS compound | SABIC Innovative Plastics | PPA | LNP™ VERTON™ |
