Order Products : sales@su-jiao.com
Elastron® G P.G401.A40.N
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | Elastron USA, Inc. |
| Trademark: | Elastron® G |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9hHWnW_Elastron-G-P-G401-A40-N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
A soft, colorable SEBS based thermoplastic elastomer (TPE) compound designed for use in medical applications. Bondable to: PP, EVA, PE |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.890 | g/cm³ | ASTM D792 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 2.7 | % | |
| Across Flow | 1.1 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 40 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% Strain | 0.900 | MPa | |
| 300% Strain | 1.70 | MPa | |
| Tensile Strength (Break) | 6.00 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 1000 | % | ASTM D412 |
| Tear Strength | 22.0 | kN/m | ASTM D624 |
| Compression Set | ASTM D395 | ||
| 23°C, 22 hr | 11 | % | |
| 70°C, 22 hr | 29 | % | |
| 100°C, 22 hr | 55 | % |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| Ozone Resistance - Stressed | No Cracks | ASTM D518 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Suggested Max Regrind | 20 | % | |
| Rear Temperature | 145 to 175 | °C | |
| Middle Temperature | 155 to 185 | °C | |
| Front Temperature | 160 to 190 | °C | |
| Nozzle Temperature | 175 to 205 | °C | |
| Mold Temperature | 25.0 to 50.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 150 to 170 | °C | |
| Cylinder Zone 2 Temp. | 155 to 175 | °C | |
| Cylinder Zone 3 Temp. | 165 to 185 | °C | |
| Cylinder Zone 4 Temp. | 175 to 205 | °C | |
| Cylinder Zone 5 Temp. | 180 to 210 | °C | |
| Die Temperature | 190 to 210 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Moplen HP500D | LyondellBasell Industries | PP Homopolymer | Moplen |
| WPP PP PPH4CF-2 | Washington Penn Plastic Co. Inc. | PP Homopolymer | WPP PP |
| ICORENE® 3560 | ICO Polymers NA, A Division of A. Schulman | LLDPE | ICORENE® |
| LUVOCOM® PA66/TF/40 | Lehmann & Voss & Co. | Nylon 66 | LUVOCOM® |
| Maxxam™ H2 GF/40 Natural | PolyOne Corporation | PP Homopolymer | Maxxam™ |
