Order Products : sales@su-jiao.com
Braskem PE HF0131
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | eQ57kn_Braskem-PE-HF0131.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
The HF0131 is a linear low density polyethylene (1) , produced through Loop Slurry process. It shows an excellent processability and mate finish. Additive: Antioxidants Lubricant Applications: Merchandising bags and promotional bags. Process: Blown Film Extrusion. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.937 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/21.6 kg) | 14 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dart Drop Impact 1(25 µm) | 160 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 25 µm | 26 | g | ASTM D1922 |
| TD : 25 µm | 360 | g | ASTM D1922 |
| Extrusion instructions |
|---|
| Recommended Blow Film Extrusion Conditions: Temperature Profile: 180°C to 210°C |
| Note Message | |
|---|---|
| 1 . | F50 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ SY 89-23-7 | PolyOne Corporation | PP, Unspecified | Maxxam™ |
| Ravalene CR L 5241 | Ravago Group | LDPE | Ravalene |
| EUROPLEX® Sheet F3 | Evonik Industries AG | PC | EUROPLEX® Sheet |
| Eastar™ EN067, Natural | Eastman Chemical Company | Copolyester | Eastar™ |
| KOPA® KN333G15V0BK | Kolon Plastics, Inc. | Nylon 66 | KOPA® |
