Order Products : sales@su-jiao.com
TRIBOCOMP® PP-C LGF30 TS12
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | EPIC Polymers |
| Trademark: | TRIBOCOMP® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9Wp24m_TRIBOCOMP-PP-C-LGF30-TS12.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TRIBOCOMP® PP-C LGF30 TS12 is a Polypropylene product filled with 30% long glass fiber. It is available in Europe. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.12 | g/cm³ | ISO 1183 |
| Molding Shrinkage - Flow | 0.40 | % | ISO 294-4 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 0.010 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 6300 | MPa | ISO 527-2 |
| Tensile Stress (Yield, 23°C) | 115 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | 3.0 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 7500 | MPa | ISO 178 |
| Flexural Stress (23°C) | 165 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 20 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength (23°C) | 44 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 140 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 135 | °C | ISO 75-2/A |
| CLTE - Flow (23°C) | 4.0E-5 | cm/cm/°C | ISO 7991 |
| Thermal Conductivity | 0.35 | W/m/K | ISO 22007 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+15 | ohms | ASTM D257 |
| Electric Strength | 45 | kV/mm | IEC 60243-1 |
| Comparative Tracking Index | 600 | V | IEC 60112 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 200 to 250 | °C | |
| Cylinder Zone 2 Temp. | 210 to 360 | °C | |
| Cylinder Zone 3 Temp. | 220 to 270 | °C | |
| Cylinder Zone 4 Temp. | 230 to 280 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PROTEQ™ CT221505 | Marplex Australia Pty. Ltd. | PP Copolymer | PROTEQ™ |
| TEKAMID™ TB120G15 | Mando Advanced Materials Co., Ltd. | Nylon 6 | TEKAMID™ |
| Flontech® FT-EK10-6 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| HOPELEN J-160H | Lotte Chemical Corporation | PP Homopolymer | HOPELEN |
| INEOS PP 150-GA03 | INEOS Olefins & Polymers Europe | PP Homopolymer | INEOS PP |
