Order Products : sales@su-jiao.com
Braskem PP HP 502H
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Braskem |
| Trademark: | Braskem PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3ZYxbf_Braskem-PP-HP-502H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HP 502H is a low melt flow homopolymer. Applications: Extrusion of sheets for thermoformed pots. Extrusion Blow Molding of bottles and pharmaceutical applications. Processing: Extrusion Thermoforming Extrusion Blow Molding |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.905 | g/cm³ | ASTM D792, ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 2.2 | g/10 min | ASTM D1238, ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness | |||
| R-Scale, Injection Molded | 99 | ASTM D785 | |
| R-Scale | 99 | ISO 2039-2 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 34.0 | MPa | ASTM D638, ISO 527-2 |
| Tensile Elongation (Yield, Injection Molded) | 12 | % | ASTM D638, ISO 527-2 |
| Flexural Modulus - 1% Secant (Injection Molded) | 1400 | MPa | ASTM D790, ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| 23°C, Injection Molded | 45 | J/m | ASTM D256 |
| 23°C, Injection Molded | 3.0 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, Unannealed, Injection Molded | 85.0 | °C | ASTM D648 |
| 0.45 MPa, Unannealed | 85.0 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 60.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 150 | °C | ISO 306/A |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Haze (1000 µm, Injection Molded) | 30 | % | ISO 13468 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tectron H2338 | TECTRON Systems Pte Ltd | TPV | Tectron |
| Spartech Polycom PP6230F A1 | Spartech Polycom | PP, Unspecified | Spartech |
| TEREZ POM 8005 GF25 | TER HELL PLASTIC GMBH | Acetal (POM) Copolymer | TEREZ POM |
| Chemical Resources ABS700 | Chemical Resources, Inc. | ABS | Chemical Resources |
| DynaMix™ 2035-L | Polymer Dynamix | Nylon 66 | DynaMix™ |
