Order Products : sales@su-jiao.com
ExxonMobil™ LLDPE LL 6301 Series Molding
| Category: | LLDPE , Linear Low Density Polyethylene Resin |
| Manufacturer: | ExxonMobil Chemical |
| Trademark: | ExxonMobil™ LLDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8Rw0dO_ExxonMobil-LLDPE-LL-6301-Series-Molding.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LL 6301 series is a medium density linear low density polyethylene grade with relatively high molecular weight, which makes the molded articles tougher and has excellent environmental stress cracking resistance. Compared with low density polyethylene grade with similar density, LL 6301 grade has higher thermal deformation temperature and higher long-term creep resistance. |
| General Information | |
|---|---|
| Additive |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 5.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (50°C, 10% Igepal) | 40.0 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 14.0 | MPa | ISO 527-2/1A/50 |
| Tensile Strain | ISO 527-2/1A/50 | ||
| Yield | 15 | % | ISO 527-2/1A/50 |
| Fracture | > 100 | % | ISO 527-2/1A/50 |
| Flexural Modulus | 440 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 50 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 112 | °C | ISO 306 |
| Additional Information |
|---|
| 成型性能是使用基于 ISO 1872-2 标准的 4 mm（157.5 mil）厚注塑成型试样测定 的。ESCR 是基于 2 mm（78.7 mil）厚的模压板所测定。 |
| Legal statement |
|---|
| 本产品不宜在医疗应用中使用，亦不应在任何此类应用中使用有关潜在食品接触应用合规信息（例如：FDA、EU、HPFB），请与埃克森美孚化工客户服务代表联系。 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEKNILID HS165 WP | Tekni-Films, a div of Tekni-Plex | Film, Coated Al Foil | TEKNILID |
| UBE Polyethylene R500 | UBE America, Inc. | PE, Unspecified | UBE Polyethylene |
| Ebalta AH 120 / TGS | Ebalta Kunststoff GmbH | Epoxy | Ebalta |
| KEBAFLEX® U A 85 HT B01 natural | BARLOG plastics GmbH | TPU, Unspecified | KEBAFLEX® |
| Moplen HP2833 | LyondellBasell Industries | PP Homopolymer | Moplen |
