Order Products : sales@su-jiao.com
Radilon® A RV150 100 NAT
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Radici Plastics |
| Trademark: | Radilon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 87PfCD_Radilon-A-RV150-100-NAT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PA66 15% glass fiber reinforced injection moulding grade. Natural colour. Suitable for parts requiring improved stiffness. ISO 1043 : PA66 GF15 |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Resin ID (ISO 1043) |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.21 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage 1 | ISO 294-4 | |||
| Across Flow | 1.1 | -- | % | |
| Flow | 0.60 | -- | % | |
| Water Absorption | ISO 62 | |||
| Saturation, 23°C, 2.00 mm | 7.9 | -- | % | |
| Equilibrium, 23°C, 2.00 mm, 50% RH | 2.3 | -- | % |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 5800 | -- | MPa | ISO 527-2/1A/1 |
| Tensile Stress | ||||
| Yield | -- | 85.0 | MPa | ISO 527-2/1A/50 |
| Break | 120 | -- | MPa | ISO 527-2/1A/5 |
| Tensile Strain | ||||
| Yield | -- | 5.0 | % | ISO 527-2/1A/50 |
| Break | 2.7 | -- | % | ISO 527-2/1A/5 |
| Nominal Tensile Strain at Break | -- | 15 | % | ISO 527-2/1A/50 |
| Flexural Modulus 2 | 5300 | -- | MPa | ISO 178 |
| Flexural Stress 3 | 190 | -- | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | |||
| -30°C | 6.0 | -- | kJ/m² | |
| 23°C | 6.5 | 9.0 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | |||
| -30°C | 32 | -- | kJ/m² | |
| 23°C | 39 | 75 | kJ/m² |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, Unannealed | 245 | -- | °C | ISO 75-2/Bf |
| 1.8 MPa, Unannealed | 220 | -- | °C | ISO 75-2/Af |
| Vicat Softening Temperature | 245 | -- | °C | ISO 306/B50 |
| Melting Temperature 4 | 260 | -- | °C | ISO 11357 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | 1.0E+12 | 1.0E+10 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | 1.0E+13 | ohms·cm | IEC 60093 |
| Comparative Tracking Index | 600 | -- | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Burning Rate | 0.0 | -- | mm/min | FMVSS 302 |
| Flame Rating (0.800 mm) | HB | -- | UL 94 | |
| Glow Wire Flammability Index (2.00 mm) | 700 | -- | °C | IEC 60695-2-12 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature - Desiccant Dryer | 80.0 | °C | |
| Drying Time - Desiccant Dryer | 2.0 to 4.0 | hr | |
| Dew Point - Desiccant Dryer | < -20.0 | °C | |
| Suggested Max Moisture | 0.15 | % | |
| Processing (Melt) Temp | 280 to 300 | °C | |
| Mold Temperature | 80.0 to 100 | °C | |
| Injection Rate | Moderate |
| Note Message | |
|---|---|
| 1 . | 295°C Melt Temp / 80°C Mold Temp / 30 Mpa Cavity press |
| 2 . | 2.0 mm/min |
| 3 . | 2.0 mm/min |
| 4 . | 10°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NOVA PC HM1045 | NOVA Polymers, Inc. | PC | NOVA PC |
| Cardia Biohybrid™ H-M03 | Cardia Bioplastics™ | TPS+PP | Cardia Biohybrid™ |
| Fibrolon® P 7550 | FKuR Kunststoff GmbH | Polyolefin, Unspecified | Fibrolon® |
| Hostacom 65F4-4C | LyondellBasell Industries | PP Homopolymer | Hostacom |
| Sylvin 4200-80UV Orange 5120 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
