Order Products : sales@su-jiao.com
TECHLEN M7392(U)
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | DAEHA Co., LTD |
| Trademark: | TECHLEN |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zNCaux_TECHLEN-M7392-U-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TECHLEN M7392(U) is a Polypropylene material. It is available in Asia Pacific. Primary attribute of TECHLEN M7392(U): High Flow. Typical application of TECHLEN M7392(U): Automotive |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.01 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 40 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 18.6 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 120 | % | ASTM D638 |
| Flexural Modulus | 1960 | MPa | ASTM D790 |
| Flexural Strength | 27.9 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact | ASTM D256 | ||
| -10°C | 69 | J/m | |
| 23°C | No Break |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 125 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® PPcompound 5521 | SABIC Innovative Plastics | PP, Unspecified | SABIC® PPcompound |
| Shandong PA1212 GA4S01 | Shandong Guangyin New Materials Co., Ltd. | Nylon 1212 | Shandong PA1212 |
| HiFill® PBT GF30 | Techmer Engineered Solutions | PBT | HiFill® |
| Lifoflex® UV FLAM 80700 | Müller Kunststoffe GmbH | TPE | Lifoflex® |
| ExxonMobil™ HDPE HPA 020HD5 Molding | ExxonMobil Chemical | HDPE, HMW | ExxonMobil™ HDPE |
