Order Products : sales@su-jiao.com
Syncure™ System S100FH-UV
| Category: | XLPE , Crosslinked Polyethylene |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Syncure™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7xGpoQ_Syncure-System-S100FH-UV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Syncure™ systems are two part moisture crosslinkable compounds. S100FH-UV is a UL bulletinized, RoHS compliant and flame retardant cable insulation compound. S100FH-UV is suitable for UL 4703 photovoltaic wire insulation not requiring an outer jacket. Graft resin component of this system has approximate shelf life of 6 months from the date of production. Please consult PolyOne for its use past 6 months. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Wire Types |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.03 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw D | 51 | ASTM D2240 | |
| Shaw D, 10 seconds | 45 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 12.1 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 400 | % | ASTM D638 |
| Deformation Under Load 3(131°C) | 7.60 | % | ASTM D621 |
| Aging | Nominal Value | Unit | |
|---|---|---|---|
| Tensile strength retention rate 4(136°C, 762.0 µm) | 99 | % | |
| Elongation retention rate 5(136°C, 762.0 µm) | 98 | % |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame test- level | Pass | UL 1581 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Catalyst parent mixture- V0022G-UV RoHS | 17 | % | |
| Transplant-based resin- S1054A | 83 | % |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| UL Temperature Rating | 90 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 43 | kV/mm | ASTM D149 |
| Dielectric Constant (1 MHz) | 2.30 | ASTM D150 | |
| Dissipation Factor (1 MHz) | 4.3E-3 | ASTM D150 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| 注释：以上情况代表了在30密耳壁的14 AWG上测量得出的典型属性。存放和搬运：包装打开之后应在48小时之内使用，避免自硬化和报废。 |
| Note Message | |
|---|---|
| 1 . | Type 4, 510mm/min |
| 2 . | Type 4, 510mm/min |
| 3 . | 2000 g, 1 hr. |
| 4 . | 168 hr, UL Standard |
| 5 . | 168 hr, UL Standard |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shuman PS SP880 | Shuman Plastics, Inc. | PS (HIPS) | Shuman PS |
| Latigray 88/10-01 CX/30 | LATI S.p.A. | PEEK | Latigray |
| Petrothene® NA980 | LyondellBasell Industries | LDPE | Petrothene® |
| Plexiglas® Heatstop 8N black | Evonik Industries AG | Acrylic (PMMA) | Plexiglas® |
| Sylvin 916VO Grey 9501 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
