Order Products : sales@su-jiao.com
Elastollan® S 64 D
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | BASF Polyurethanes GmbH |
| Trademark: | Elastollan® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7i9wk0_Elastollan-S-64-D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Thermoplastic Polyester Polyurethane Elastomers with excellent mechanical properties, outstanding wear resistance, good damping and resilience performance and excellent tear strength. Typical applications Shoe soles, top pieces, tubes, technical parts e.g. castor tyres. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.26 | g/cm³ | ISO 1183/A |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, 3 sec) | 64 | ISO 7619 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 410 | MPa | ISO 527-2 |
| Abrasion Loss | 25.0 | mm³ | ISO 4649-A |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | DIN 53504 | ||
| 20% Strain | 22.0 | MPa | |
| 100% Strain | 23.0 | MPa | |
| 300% Strain | 38.0 | MPa | |
| Tensile Stress (Yield) | 45.0 | MPa | DIN 53504 |
| Tensile Elongation (Break) | 450 | % | DIN 53504 |
| Tear Strength 1 | 200 | kN/m | ISO 34-1 |
| Compression Set | ISO 815 | ||
| 23°C, 72 hr | 45 | % | |
| 70°C, 24 hr | 55 | % |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -30°C | 4.0 | kJ/m² | |
| 23°C | No Break |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 175 to 240 | °C | |
| Mold Temperature | 20.0 to 70.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 175 to 220 | °C |
| Note Message | |
|---|---|
| 1 . | Method Bb, Angle (Nicked) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VAMPAMID 6 2028 V2 MF | Vamp Tech | Nylon 6 | VAMPAMID |
| Next Nylon 66 Prime Series PGF30-01NC | Next Polymers Ltd. | Nylon 66 | Next Nylon 66 Prime Series |
| 3M™ Dyneon™ PTFE TF 1620 | 3M Advanced Materials Division | PTFE | 3M™ Dyneon™ PTFE |
| CALP 5600B-2 | Lion Idemitsu Composites Co., Ltd. | HDPE | CALP |
| OTECH PVC OF7033-Soles | OTECH Corporation | PVC, Unspecified | OTECH PVC |
