Order Products : sales@su-jiao.com
TPUCO® TPUI-H95
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | Taiwan PU Corporation |
| Trademark: | TPUCO® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5IudDX_TPUCO-TPUI-H95.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TPUCO® TPUI-H95 is a Thermoplastic Polyurethane Elastomer (Polyether) (TPU-Polyether) material. It is available in Asia Pacific for injection molding. Primary attribute of TPUCO® TPUI-H95: Wear Resistant. Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 95 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Loss | 20.0 | mg |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Impact Resilience | 45 | % |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% Strain | 9.81 | MPa | |
| 300% Strain | 17.7 | MPa | |
| Tensile Strength (Break) | 41.2 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 500 | % | ASTM D412 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 185 | °C | |
| Cylinder Zone 3 Temp. | 190 | °C | |
| Cylinder Zone 5 Temp. | 195 | °C | |
| Adapter Temperature | 200 | °C | |
| Die Temperature | 200 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Makrolon® OD2015 | Covestro - Polycarbonates | PC | Makrolon® |
| SLOVAMID® 6 GF 60 000/1M | Plastcom | Nylon 6 | SLOVAMID® 6 |
| Nypol® PA A3 ST VRM0076 NR325 | Petropol Industry and Trade of Polymers LTDA | Nylon 66 | Nypol® PA |
| Chemraz 565 | Greene, Tweed & Co. | Perfluoroelastomer | Chemraz |
| Lumid® LW4403B(W) | LG Chem Ltd. | Nylon 66+ABS | Lumid® |
