Order Products : sales@su-jiao.com
TYNEC® CG300
| Category: | PC , Polycarbonate |
| Manufacturer: | Tyne Plastics LLC. |
| Trademark: | TYNEC® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SQu1vs_TYNEC-CG300.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Data was measured on natural colored test specimens. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.44 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 5.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.10 to 0.30 | % | ASTM D955 |
| Water Absorption | ASTM D570 | ||
| 24 hr | 0.11 | % | |
| Saturation | 0.29 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 8960 | MPa | ASTM D638 |
| Tensile Strength (Break) | 124 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 2.0 | % | ASTM D638 |
| Flexural Modulus | 8270 | MPa | ASTM D790 |
| Flexural Strength | 159 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm) | 160 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 1200 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 152 | °C | |
| 1.8 MPa, Unannealed | 149 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Strength (3.18 mm, in Air) | 16 | kV/mm | ASTM D149 |
| Dielectric Constant (1 MHz) | 3.20 | ASTM D150 | |
| Dissipation Factor (1 MHz) | 0.010 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.59 mm | V-2 | ||
| 3.18 mm | V-1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYSTONE® P med | Röchling Engineering Plastics SE & Co. KG | PP Homopolymer | POLYSTONE® |
| TAROMID A 280 G2 X0 | Taro Plast S.p.A. | Nylon 66 | TAROMID A |
| ALCOM® ABS 530/22 SV1287-04MCS | ALBIS PLASTIC GmbH | ABS | ALCOM® ABS |
| HiFill® PP 0096 S3 | Techmer Engineered Solutions | PP, Unspecified | HiFill® |
| POLYblend PC/ABS 45FS GF20 | Polykemi AB | PC+ABS | POLYblend |
