Order Products : sales@su-jiao.com
Moplen RP348N
| Category: | PP Random Copolymer , Polypropylene Random Copolymer |
| Manufacturer: | PolyMirae |
| Trademark: | Moplen |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3qh7HC_Moplen-RP348N-88026.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Moplen RP348N is the polypropylene random copolymer manufactured by PMC under the license of BASELL using the Spheripol process. Moplen RP348N is a random copolymer particularly suitable for injection molding of houseware. Moplen RP348N meets the FDA requirement in the code of Federal Regulations in 21 CFR 177.1520 for food contact |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 11 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 28.4 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 13 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 1050 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 69 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Injection Molded) | 86.0 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SUSTAPEEK MG blue | Röchling Sustaplast SE & Co. KG | PEEK | SUSTAPEEK |
| VENYL ST208 - 7935 | AD majoris | Nylon 6 | VENYL |
| TULAMID® PA-SV30-LT2 | UCC Shchekinoazot | Nylon 6 | TULAMID® |
| BCC Resins BC 100 Thin | BCC Products Inc. | EA | BCC Resins |
| Badamid® A70 GK30 | Bada AG | Nylon 66 | Badamid® |
