Order Products : sales@su-jiao.com

Braskem PP DH789.01

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	Braskem Europe GmbH
Trademark:	Braskem PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	QYqwpy_BraskemPPDH78901.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
BRASKEM DH789.01 Developmental Polypropylene Resin is a homopolymer for Injection Molding, Twin Wall Injection Molding and High Speed Injection Moulding. This resin offers a good balance of physical properties and excellent organoleptic. BRASKEM DH789.01 Polypropylene Resin contains a very efficient antistatic and nucleation package and provides excellent optical properties. It is designed and formulated to allow for very easy processing, short cycle times, low shrinkage, minimal warpage and good part dimensional stability. Applications: Thin wall packaging e.g. food, caps & closures, cosmetics Thin wall consumer goods e.g. housewares, appliances, video boxes, office accessories Process: High Speed Injection Moulding

Message

BRASKEM DH789.01 Developmental Polypropylene Resin is a homopolymer for Injection Molding, Twin Wall Injection Molding and High Speed Injection Moulding. This resin offers a good balance of physical properties and excellent organoleptic. BRASKEM DH789.01 Polypropylene Resin contains a very efficient antistatic and nucleation package and provides excellent optical properties. It is designed and formulated to allow for very easy processing, short cycle times, low shrinkage, minimal warpage and good part dimensional stability.

Applications:

Thin wall packaging e.g. food, caps & closures, cosmetics

Thin wall consumer goods e.g. housewares, appliances, video boxes, office accessories

Process:

High Speed Injection Moulding

General Information
Additive	Nucleating agent Antistatic property
Features	Nucleated Good dimensional stability Low warpage Optical Homopolymer Antistatic property Workability, good Good formability Good sensory characteristics Low shrinkage
Uses	Cosmetic Packaging Packaging Electrical appliances Shield Household goods Food packaging Shell Hard packaging
Agency Ratings	FDA 21 CFR 177.1520(c) 1.1 Europe 10/1/2011 12:00:00 AM
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	0.900	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	50	g/10 min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Flexural Modulus (Injection Molded)	1700	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (23°C, Injection Molded)	2.5	kJ/m²	ISO 179/1eA

Resin Grade	Manufacturer	Category	Trademark
Texalan® 6 Series 682A	Austin Novel Materials Co. Ltd.	TPU-Ester/Ether	Texalan® 6 Series
Abstron HR60N	Bhansali Engineering Polymers Limited	ABS	Abstron
Epocast 1617 A/B	Huntsman Advanced Materials	Epoxy	Epocast
EPDM 570	The Dow Chemical Company	EPDM	EPDM
INEOS PP H07G-00	INEOS Olefins & Polymers USA	PP Homopolymer	INEOS PP