Order Products : sales@su-jiao.com

TECAPEEK® GF30

Category:	PEEK , Polyetheretherketone
Manufacturer:	Ensinger Inc.
Trademark:	TECAPEEK®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	2UqL0c_TECAPEEK-GF30.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

TECAPEEK® GF30 is Ensinger's 30% glass fiber reinforced TECAPEEK product. Made with Victrex 450 GL30 PEEK polymer, it offers enhanced mechanical and thermal properties over those of our basic TECAPEEK offering. It also offers excellent resistance in harsh chemical environments and is electrically insulative.

TECAPEEK™s exceptional property profile enables it to be utilized in many of the most critical areas in general industry, as well as in the automotive, marine, nuclear, oil well, electronics, medical and aerospace fields.

General Information
Filler / Reinforcement	Glass fiber reinforced material, 30% filler by weight
Features	Good dimensional stability Low smoke Insulation Anti-gamma radiation Good wear resistance Good chemical resistance Good wear resistance Heat resistance, high Hydrolysis resistance
Uses	Ship application Electrical/Electronic Applications Industrial application Aerospace applications Nuclear energy applications Application in Automobile Field Oil/Gas Supplies Medical/nursing supplies
Forms	Shapes

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.53	g/cm³	ASTM D792
Water Absorption (23°C, 24 hr)	0.11	%	ASTM D570

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (M-Scale)	103		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus - 1% Secant (23°C)	9700	MPa	ASTM D638
Tensile Strength (Yield, 23°C)	157	MPa	ASTM D638
Tensile Elongation (Break, 23°C)	2.2	%	ASTM D638
Flexural Modulus (23°C)	10300	MPa	ASTM D790
Flexural Strength (23°C)	233	MPa	ASTM D790
Compressive Strength (23°C)	215	MPa	ASTM D695
Shear Strength (23°C)	97.2	MPa	ASTM D3846
Coefficient of Friction ¹	0.30

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	96	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed, 6.35 mm)	316	°C	ASTM D648
Continuous Use Temperature	260	°C
Melting Temperature	334	°C
CLTE - Flow	2.2E-5	cm/cm/°C	ASTM D696
Thermal Conductivity	0.43	W/m/K	ASTM C177

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	1.0E+16	ohms	ASTM D257
Volume Resistivity (23°C)	1.0E+16	ohms·cm	ASTM D257
Dielectric Strength	6.9	kV/mm	ASTM D149

Flammability	Nominal Value	Unit	Test Method
Flame Rating	V-0		UL 94

Additional Information
Data obtained from extruded shapes material

Note Message
1 .	@ 68°F, 1200 in/min, 155 lbs Load

Resin Grade	Manufacturer	Category	Trademark
Spartech Polycom PP5440	Spartech Polycom	PP, Unspecified	Spartech
TES J-50/20	Techmer Engineered Solutions	PC	TES
Gallonprene® GP410-6501	Shenzhen Sungallon Rubber & Plastic Corporation Limited	TPE	Gallonprene®
Grivory® HTV-6H1 nat	EMS-GRIVORY	Nylon 6I/6T	Grivory®
Sylvin 6168-80 Yellow 405	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin