Order Products : sales@su-jiao.com

Epoxies, Ect. 10-3046

Category:	Epoxy , Epoxy; Epoxide
Manufacturer:	Epoxies, Etc.
Trademark:	Epoxies, Ect.
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	2TVIr0_Epoxies-Ect-10-3046.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

46 minute set epoxy

These high bond strength adhesives are clear 100% solids, two component, low viscosity adhesives with a quick setting time of 5-46 minutes at room temperature. They are excellent for bonding plated metals, pewter, glass, wood, ceramic, felt, cement, gem stones, most plastics and rubbers, etc...

These adhesives were tested in our laboratory for flame retardancy properties. According to our test results they meet the requirements of UL94HB.

Applications:

These unique adhesives are ideally suited for a wide range of electronic, electrical, industrial, structural, and jewelry applications. These adhesives are also an excellent choice for field repairs. They are offered in the popular TriggerBond® dual barrel cartridge dispensing system and bulk packaging.

Features:

High bond strength

Fast room temperature cure - three speeds to choose from

Water and chemical resistance

Outstanding thermal shock resistance

1:1 mix ratio

Impact resistance

General Information
Features	Bondability Fast Cure Flame Retardant Good Adhesion Good Chemical Resistance Good Impact Resistance Good Thermal Shock Resistance Low to No Water Absorption Low Viscosity
Uses	Adhesives Bonding Electrical/Electronic Applications Industrial Applications Jewelry Structural Parts
Appearance	Clear/Transparent

Impact	Nominal Value	Unit
Notched Izod Impact	140	J/m

Thermal	Nominal Value	Unit
CLTE - Flow	6.0E-5	cm/cm/°C

Thermoset	Nominal Value	Unit
Thermoset Mix Viscosity (25°C)	12000	cP

Additional Information	Nominal Value	Unit
Handle Time (25°C)	55.0 to 60.0	min
Operating Temperature	-50.0 to 130	°C

Uncured Properties	Nominal Value	Unit
Color	Clear/Transparent
Mix Ratio by Weight (PBW)
Part A	1.0
Part B	1.0
Solids Content	100	%
Density (25°C)	1.15	g/cm³
Curing Time (25°C)	24 to 48	hr
Pot Life (25°C)	25 to 30	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore D)	65
Compression Strength	58.6	MPa
Electric Strength	17	kV/mm
Relative Permittivity (1 kHz, 25°C)	4.00
Volume Resistivity (25°C)	2.0E+14	ohms·cm
Dissipation Factor (1 kHz)	0.017

Resin Grade	Manufacturer	Category	Trademark
PRL AC-GP2	Polymer Resources Ltd.	Acetal (POM) Copolymer	PRL
S&E Wire & Cable GTPO9005	S&E Specialty Polymers, LLC	TPO (POE)	S&E Wire & Cable
Sylvin 8773-60D Black 281	Sylvin Technologies Incorporated	PVC, Semi-Rigid	Sylvin
TUFNYL® SGF 25 BLACK	SRF Ltd.	Nylon 6	TUFNYL®
LUCITE® 41	Lucite International Inc.	Acrylic (PMMA)	LUCITE®