Order Products : sales@su-jiao.com
Spartech Polycom SC5-3210
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Spartech Polycom |
| Trademark: | Spartech |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 21x624_Spartech-Polycom-SC5-3210.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Spartech SC5-3210 is a medium viscosity PP homopolymer resin for injection molding that features 10% glass fiber reinforcement. It is heat stabilized and lubricated for good processing characteristics. Polypropylene is a versatile thermoplastic offering a useful balance of heat and chemical resistance, good mechanical and electrical properties and processing ease. PP is resistant to deformation at elevated temperatures. A very versatile product for a wide variety of applications, Spartech SC5-3210 is recommended for industrial, transportation, sporting goods and electrical/electronic applications. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.978 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 9.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 31.7 | MPa | ASTM D638 |
| Flexural Modulus (23°C) | 1240 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 37 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 126 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.6 | °C | |
| Drying Time | 1.0 | hr | |
| Rear Temperature | 216 - 227 | °C | |
| Middle Temperature | 221 - 232 | °C | |
| Front Temperature | 227 - 238 | °C | |
| Nozzle Temperature | 232 - 243 | °C | |
| Processing (Melt) Temp | 204 - 260 | °C | |
| Mold Temperature | 26.7 - 37.8 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Premi-Glas® 2206-25 CR-SX | Premix, Inc. | TS, Unspecified | Premi-Glas® |
| MTM® 248S | Cytec Industries Inc. | Epoxy | MTM® |
| DynaMix™ PD5501 | Polymer Dynamix | ETFE | DynaMix™ |
| PENTAMID A L1 H natural | PENTAC Polymer GmbH | Nylon 66 | PENTAMID A |
| SABIC® LLDPE 318B | Saudi Basic Industries Corporation (SABIC) | LLDPE | SABIC® LLDPE |
