Order Products : sales@su-jiao.com
Wanthane® WHT-8885
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | Wanhua Chemical Group Co., Ltd. |
| Trademark: | Wanthane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1OL6pa_WanthaneWHT8885.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TYPE: Polyether-based grade Extrusion grade FEATURES: Excellent hydrolytic stability, fungus resistance, good processability, good low-temperature flexibility APPLICATIONS: Hose jacketing, fabric coating, etc. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.11 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 88 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| DIN Abrasion | 40.0 | mm³ | ISO 4649 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 8.00 | MPa | ASTM D412 |
| 300% strain | 17.0 | MPa | ASTM D412 |
| Tensile Strength (Break) | 45.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 460 | % | ASTM D412 |
| Tear Strength | 121 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90 - 100 | °C | |
| Drying Time | 2.0 - 3.0 | hr | |
| Suggested Max Moisture | 0.030 | % | |
| Screw L/D Ratio | 25.0:1.0 to 30.0:1.0 | ||
| Screw Compression Ratio | 2.0 : 1.0 - 3.0 : 1.0 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90 - 100 | °C | |
| Drying Time | 2.0 - 3.0 | hr | |
| Suggested Max Moisture | 0.030 | % | |
| Cylinder Zone 1 Temp. | 170 | °C | |
| Cylinder Zone 2 Temp. | 175 | °C | |
| Cylinder Zone 3 Temp. | 180 | °C | |
| Cylinder Zone 4 Temp. | 185 | °C | |
| Adapter Temperature | 190 | °C | |
| Die Temperature | 185 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Staramide RFM3353EM | Eurostar Engineering Plastics | Nylon 66/6 | Staramide |
| ALTECH® PA6 A 2020/109 GF20 | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
| Daelim Po1y® 4570 UV | DAELIM INDUSTRIAL CO., LTD. | HDPE | Daelim Po1y® |
| Hytrel® G4078 NC010 | DuPont Performance Polymers | TPC-ET | Hytrel® |
| PARAPET GR-H60 | Kuraray Co., Ltd. | Acrylic (PMMA) | PARAPET |
