Order Products : sales@su-jiao.com
Jam PE 20516
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Jam Petrochemical Company |
| Trademark: | Jam PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | oADgYh_Jam-PE-20516.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Jam PE 20516 is a Linear Low Density Polyethylene product. It can be processed by injection molding and is available in Africa & Middle East. Primary characteristic: butene comonomer. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.922 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 16 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Compression Molded | 12.0 | MPa | |
| Break, Compression Molded | 6.80 | MPa | |
| Tensile Elongation (Break, Compression Molded) | 200 | % | ASTM D638 |
| Flexural Modulus (Compression Molded) | 430 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | No Break | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 46.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 88.0 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ProtoTherm 12120 | DSM Somos® | Unspecified | ProtoTherm |
| CAPROWAX P™ 6006-65-NF4040-000 | POLYFEA | Biodeg Polymers | CAPROWAX P™ |
| ColorFast® FRPBT210 | LTL Color Compounders, Inc. | PBT | ColorFast® |
| FARALLOY® PE-204 | O'Neil Color and Compounding | HDPE, HMW | FARALLOY® |
| Hiprolon® 400 NN LM | Arkema | Nylon 1012 | Hiprolon® |
