Order Products : sales@su-jiao.com
TPUCO® TPUI-H90
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | Taiwan PU Corporation |
| Trademark: | TPUCO® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zzo36Q_TPUCO-TPUI-H90.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TPUCO® TPUI-H90 is a Thermoplastic Polyurethane Elastomer (Polyether) (TPU-Polyether) material. It is available in Asia Pacific for injection molding. Primary attribute of TPUCO® TPUI-H90: Wear Resistant. Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 90 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Loss | 25.0 | mg |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Impact Resilience | 50 | % |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% Strain | 8.34 | MPa | |
| 300% Strain | 13.7 | MPa | |
| Tensile Strength (Break) | 39.2 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 550 | % | ASTM D412 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 180 | °C | |
| Cylinder Zone 3 Temp. | 185 | °C | |
| Cylinder Zone 5 Temp. | 190 | °C | |
| Adapter Temperature | 195 | °C | |
| Die Temperature | 195 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1000 AR 15 TFE 20 | RTP Company | PBT | RTP |
| Toraycon® 5101G-30U | Toray Resin Company | PBT | Toraycon® |
| ALTECH® PP-H A 4940/506 MR40 | ALBIS PLASTIC GmbH | PP Homopolymer | ALTECH® PP-H |
| Flontech® FT-GL15-M5-3 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| Indothene 1005FY20 | Reliance Industries Limited | LDPE | Indothene |
