Order Products : sales@su-jiao.com
ECOMID B GF30
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Nilit Plastics |
| Trademark: | ECOMID |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zy5fnh_ECOMID-B-GF30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ECOMID® B GF30 is a Polyamide 6 (Nylon 6) compound, 30% glass fiber reinforced. This eco friendly compound is intended for injection molding. ECOMID® B GF30 is primarily designed for the Automotive industry. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Recycled Content |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.35 | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | ||
| Across Flow : 23°C | 0.80 | % | |
| Flow : 25°C | 0.40 | % | |
| Water Absorption | ISO 62 | ||
| 23°C, 24 hr | 1.8 | % | |
| Saturation, 23°C | 6.5 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 8500 | MPa | ISO 527-2 |
| Tensile Stress (Yield, 23°C) | 140 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | 3.0 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30°C | 4.0 | kJ/m² | |
| 23°C | 6.0 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | ||
| -30°C | 30 | kJ/m² | |
| 23°C | 40 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 220 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 210 | °C | ISO 75-2/A |
| Continuous Use Temperature 1 | 105 | °C | IEC 60216 |
| Ball Pressure Test (127°C) | Pass | IEC 60695-10-2 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+12 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | ohms·cm | IEC 60093 |
| Comparative Tracking Index (3.20 mm, Solution A) | 500 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.60 mm | HB | ||
| 3.20 mm | HB | ||
| Glow Wire Flammability Index | IEC 60695-2-12 | ||
| 0.800 mm | 650 | °C | |
| 3.20 mm | 650 | °C |
| Note Message | |
|---|---|
| 1 . | 20002 hrs |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 204 RC HS Black | RTP Company | Nylon 66 | RTP |
| Pro PP-HO-40T | Pro Polymers | PP Homopolymer | Pro-Comp™ |
| ASTAMID™ MB3TUV | Marplex Australia Pty. Ltd. | Nylon 6 | ASTAMID™ |
| Huafon HF-1175AP | Huafon Group Co., Ltd. | TPU-Polyester | Huafon |
| POLYFORT® FPP 2181 | A. Schulman Inc. | PP, Unspecified | POLYFORT® |
