Order Products : sales@su-jiao.com
Kemcor LD 1145
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Qenos Pty Ltd |
| Trademark: | Kemcor |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zxDmW1_Kemcor-LD-1145.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This resin in manufactured to conform to the requirements for unrestricted food contact of AS 2070 Part 1 (1992). |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.922 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.20 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 43 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 8.00 | MPa | |
| Break | 14.0 | MPa | |
| Tensile Elongation (Break) | 630 | % | ASTM D638 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+17 | ohms·cm | ASTM D257 |
| Dielectric Constant | 2.06 | ASTM D150 | |
| Dissipation Factor | 2.5E-4 | ASTM D150 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| tefabloc® TO 421 | Mitsubishi Chemical Performance Polymers, Inc. | TPE | tefabloc® |
| Sindustris PP GP1008FE | Sincerity Australia Pty Ltd. | PP, Unspecified | Sindustris PP |
| Dynaflex™ G7680-9 (Black) | PolyOne Corporation | TPE | Dynaflex™ |
| Electrafil® 02010 MB | Techmer Engineered Solutions | PP, Unspecified | Electrafil® |
| INEOS HDPE K44-11-128 | INEOS Olefins & Polymers USA | HDPE Copolymer | INEOS HDPE |
